Até 27 de Novembro de 2017

Envie um resumo

Para realizar a submissão da(s) sua(s) resumo(s)/Comunicação(ões) deverá criar/aceder à sua Área Pessoal, utilizando a plataforma EasyChair. Os Resumos e Artigos poderão ser escritos em Português, Inglês, Castelhano ou Italiano e devem ter no máximo 300 palavras.

0 Days Left
00 Hours
00 Minutes
00 Seconds

Enquadramento

Para o especialista em patologia e reabilitação das estruturas é fundamental o conhecimento: da tecnologia dos materiais utilizados (pedra, adobe, madeira, aço, betão ou outro); das características geométricas das estruturas; dos possíveis ensaios de caracterização física e mecânica dos materiais; do comportamento dos elementos estruturais e das soluções de reabilitação e reforço para cada construção. Nos últimos anos, a evolução do conhecimento nos domínios da patologia e reabilitação das construções, tem evidenciado um impulso significativo, por um lado pela crescente sensibilização dos diversos intervenientes no sector da construção, e por outro pelo surgimento de novos materiais e de técnicas construtivas. Estatísticas recentes mostram que o investimento no sector da reabilitação tem aumentado consideravelmente nos últimos anos. O CINPAR 2018 representa uma importante oportunidade para a aquisição de novos conhecimentos, técnicas e tecnologias, e para a troca de experiências em trabalhos de reabilitação e reforço de estruturas.

Objetivos

  • Divulgar e discutir os métodos de inspeção de estruturas e caracterização dos materiais;
  • Apresentar e discutir as patologias mais frequentes nas construções;
  • Conhecer e analisar as principais causas das patologias, considerando que este aspeto é fundamental para que a reabilitação tenha êxito;
  • Divulgar os materiais mais utilizados nos trabalhos de reabilitação e reforço de estruturas existentes;
  • Apresentar e discutir soluções de reabilitação e reforço de estruturas;
  • Promover a troca de experiências nos domínios do estudo das patologias e da reabilitação e reforço de estruturas entre os profissionais que atuam nesta área.

image description

Tópicos

T1 - Patologias
T2 - Materiais
T3 - Procedimentos
T4 - Projetos
T5 - Património histórico

Wednesday

June 20, 2018

Registration

Opening Session

Opening Lecture

Coffee-Break

Keynote Lecture

Keynote Lecture

Lunch

Keynote Lecture

Session 20-A

  • Session 20-A-1 PT
  • Session 20-A-2 EN
  • Session 20-A-3 EN
  • Session 20-A-4 PT

Coffee-Break / Technical Exhibition

Session 20-B

  • Session 20-B-1 PT
  • Session 20-B-2 EN
  • Session 20-B-3 PT
  • Session 20-B-4 PT

Thursday

June 21, 2018

Keynote Lecture

Session 21-A

  • Session 21-A-1 PT
  • Session 21-A-2 EN
  • Session 21-A-3 EN
  • Session 21-A-4 PT

Coffee-Break / Technical Exhibition

Keynote Lecture

Session 21-B

  • Session 21-B-1 PT
  • Session 21-B-2 EN
  • Session 21-B-3 PT
  • Session 21-B-4 PT

Lunch

Keynote Lecture

Session 21-C

  • Session 21-C-1 PT
  • Session 21-C-2 EN
  • Session 21-C-3 EN
  • Session 21-C-4 PT

Coffee-Break / Technical Exhibition

Session 21-D

  • Session 21-D-1 PT
  • Session 21-D-2 EN
  • Session 21-D-3 PT
  • Session 21-D-4 PT

Social Dinner

Friday

June 22, 2018

Keynote Lecture

Petr Stepanek

Session 22-A

  • Session 22-A-1 PT
  • Session 22-A-2 EN
  • Session 22-A-3 EN
  • Session 22-A-4 PT

Coffee-Break / Technical Exhibition

Session 22-B

  • Session 22-B-1 PT
  • Session 22-B-2 EN
  • Session 22-B-3 PT
  • Session 22-B-4 PT

Lunch

Keynote Lecture

Session 22-A

  • Session 22-C-1 PT
  • Session 22-C-2 EN
  • Session 22-C-3 PT
  • Session 22-C-4 PT

Coffee-Break / Technical Exhibition

Session 22-D

  • Session 22-D-1 PT
  • Session 22-D-2 EN
  • Session 22-D-3 PT
  • Session 22-D-4 PT

Organização

Apoio Institucional

Patrocionadores

Aguarde...

Comité Internacional de Organização

  • President: Francisco Carvalho (UVA, BRAZIL)
  • Vice-President: Humberto Varum (FEUP, PORTUGAL)
  • General Secretary: Esequiel Mesquita (NUTEC/FAS, BRAZIL)
  • Vice General Secretary: Gibson Meira (IFPB, BRAZIL)
  • Director of Institutional Relations: Maria Soledad (PUC, CHILE)
  • Vice Director of Institutional Relation: Angel Oshiro (UTN, ARGENTINA)
  • Director of Research and Development: Maria Positiere (UTN, ARGENTINA)
  • Vice Director Research and Development: Eduardo Ballan (UCJC, SPAIN)
  • Technical Director: Alexandre Bertini (UFC, BRAZIL)

Comité Local de Organização

  • Gianni Bartoli (UNIFI, ITALY), President
  • Michele Betti (UNIFI, ITALY), President
  • Barbara Pintucchi (UNIFI, ITALY), Vice-President
  • Mario Fagone (UNIFI, ITALY), Secretary
  • Chiara Bernardini (UNIFI, ITALY)
  • Andrea Borghini (UNIFI, ITALY)
  • Sonia Boschi (UNIFI, ITALY)
  • Alberto Ciavattone (UNIFI, ITALY)
  • Luca Facchini (UNIFI, ITALY)
  • Antonino Maria Marra (UNIFI, ITALY)
  • Silvia Monchetti (UNIFI, ITALY)
  • Maurizio Orlando (UNIFI, ITALY)
  • Luca Pigolotti (UNIFI, ITALY)
  • Gloria Terenzi (UNIFI, ITALY)
  • Giacomo Zini (UNIFI, ITALY)

Comissão Científica

  • MESQUITA, Esequiel (NUTEC/FAS, BRAZIL), President
  • ADAM, Jose (ICITECH, SPAIN)
  • ASCIONE, Luigi (Salerno), Italy
  • BABADOPULOS, Lucas (FAS, BRAZIL)
  • BALLAN, Eduardo (UCJC, SPAIN)
  • BANCO, Luiz (Fumec-BR)
  • BARAHONA, Pablo (PUC, CHILE)
  • BAUER, Elton (UnB, BRAZIL)
  • BERTINI, Alexandre (UFC, BRAZIL)
  • BORRI, Antonio (Perugia, Italy)
  • BUSON, Marcio (UnB, BRAZIL)
  • CABRAL, Eduardo (UFC, BRAZIL)
  • CARDOSO, Héctor (UNSa, Argentina)
  • CARVALHO, Francisco (UVA, BRAZIL)
  • CLEMENTI, Francesco (Parma), Italy
  • CORREIA, José (INEGI, PORTUGAL)
  • DAHER, César (IDD, BRAZIL)
  • DELGADO, João (FEUP, PORTUGAL)
  • DESTEFANI, André (IFF, BRAZIL)
  • GEIMBA, Maryangela (ITA, BRAZIL)
  • GIRARDI, Maria (CNR – ISTI, Pisa), Italy
  • GIURIANI, Ezio (Brescia), Italy
  • IVORRA, Salvador (EPS, SPAIN)
  • JURINA, Lorenzo (Pol. Milan), Italy
  • LAGOMARSINO, Sergio (Genoa), Italy
  • LATERZA, Michelangelo (Basilicata), Italy
  • LORENZINI, Soledad (PUC, CHILE)
  • LUCA , César De (IDD, BRAZIL)
  • LUCCHESI, Massimiliano (UNIFI, ITALY)
  • MARINHO, Jefferson (URCA/iTec, BRAZIL)
  • MARTINI, Rachel (CEFETE, BRAZIL)
  • MEDEIROS, Marcelo (UFPR, BRAZIL)
  • MEDEIROS JUNIOR, Ronaldo (UFPR, BRAZIL)
  • MEIRA, Gibson (IFPB, BRAZIL)
  • MILANI, Gabriele (Pol. Milan), Italy
  • MONTI, Giorgio (Rome), Italy
  • MOREIRA, Kelvya (UVA, BRAZIL)
  • OLIVEIRA, Fabiana (USP, BRA)
  • OSHIRO, Angel (UTN, ARGENTINA)
  • PALLARES, Francisco (ICITECH, SPAIN)
  • PAZINI, Enio (UFG, BRAZIL)
  • PORTO, Francesca Da (Padua), Italy
  • POSSAN, Edna (UNILA, BRAZIL)
  • POSITIERI, Maria (UTN, ARGENTINA)
  • RAGGIOTTI, Belén (UTN - ARG)
  • RIVA, Paolo (Bergamo), Italy
  • ROHDEN, Abrahão (FURB, BRAZIL)
  • RUBIO, Luis (ICITECH, SPAIN)
  • SASTRE, Maria (UNSa, Argentina)
  • SILVA, Thiago (IFTO, BRAZIL)
  • SILVESTRI, Stefano (Bologna), Italy
  • SOTA, Jorge (LEMIT, ARGENTINA)
  • SPACONE, Enrico (Chieti‐Pescara), Italy
  • SPINELLI, Paolo (UNIFI, ITALY)
  • STEPÁNEK, Petr (VUTBR, CZECH REPUBLIC)
  • TAVARES, Leonardo (FAS, BRAZIL)
  • TRAVERSA, Luis (LEMIT, ARGENTINA)
  • TUTIKAN, Bernardo (UNISINOS, BRAZIL)
  • VARUM, Humberto (FEUP, PORTUGAL)
  • VIGNOLI, Andrea (UNIFI, ITALY)

Apoio

Aguarde...

Idiomas

No CINPAR os autores poderão apresentar os seus artigos e as suas comunicações orais num dos seguintes idiomas:

  • Português
  • Castelhano
  • Inglês

Não haverá tradução simultânea no congresso. Independentemente do idioma usado na comunicação oral, os autores são encorajados a preparar a sua apresentação em inglês.

Instruções para autores

Para realizar a submissão da(s) sua(s) resumo(s)/Comunicação(ões) deverá criar/aceder à sua Área Pessoal, utilizando a plataforma EasyChair.

Os Resumos e Artigos poderão ser escritos em Português, Inglês ou Castelhano e devem ter no máximo 300 palavras.

IMPORTANTE: Cada autor só poderá submeter até um máximo de 2 Comunicações. Caso um autor esteja envolvido em mais de 2 Comunicações em parceria com outros coautores, a submissão das restantes Comunicações deverá ser efetuada por um dos coautores. O autor ou coautor que fizer a submissão terá de estar inscrito no CINPAR2018, e pagar a correspondente inscrição para assegurar a publicação da(s) respetiva(s) Comunicação(ões).

As normas para elaboração dos Artigos completos estão disponíveis no próprio template modelo.

Além da publicação regular dos anais do XIV Congresso Internacional sobre Patologia e Recuperação das Construções, os trabalhos escritos exclusivamente em língua inglesa serão publicados também no Elsevier’s Procedia Structural Integrity. Para isto, os autores interessados devem preparar seus manuscritos usando o template ELSEVIER_CINPAR2018, disponível no link abaixo.

Revistas Associadas

Journal of Building Pathology and Rehabilitation

Os melhores artigos apresentados no congresso poderão ser convidados para publicação numa edição especial do Journal of Building Pathology and Rehabilitation, através da adaptação do artigo submetido aos formatos do Journal e seguindo o processo regular de revisão dos Editores. Maiores informações poderão ser obtidas através do link:

http://www.springer.com/engineering/civil+engineering/journal/41024

Palestrantes Cinpar 2018

Prof. Grazia Tucci (University of Florence)

GEOMATICS FOR STRUCTURAL ASSESSMENT AND SURFACE DIAGNOSTIC OF CULTURAL HERITAGE

Prof. Grazia Tucci (University of Florence)

She is Associated Professor of Topography and Cartography at the Department of Civil and Environmental Engineering of the University of Florence. From 2008 she is the Director of the GeCo (Geomatics for the Environment and the Conservation of cultural heritage) Laboratory, which hosts research associates, research fellows, PhD students, visiting researchers, as well as Italian and foreign interns and trainees. The specific aim of her field of action has always been the need to stress the importance of "measurement" and its "quality", both to describe the general conditions and to examine the risk factors to which our Cultural Heritage is exposed. She also is the Scientific Manager for the joined Laboratory SCHEMA (Survey, Cultural Heritage, Engineering, Monitoring and Analysis) for the knowledge of the Environment and the management of the risk. She is Scientific Manager of national and international research projects and she coordinates survey campaigns in Italy and abroad. She is author of more than 170 scientific papers.

The capacity to rapidly acquire large quantities of spatial data, to geo-reference any kind of information on them, to obtain detailed models that allow more and more accurate analyses and simulations, place Geoinformatics at the centre of attention in many research areas. Among these, the use of these techniques for the study of existing structures is particularly interesting. Assessing the current stability of a building, identifying its degradation conditions, monitoring the evolution over time of a failure, preventing the potential causes of damage, simulating or reconstructing the behaviour of a building under seismic actions, are just some of the ways in which the geometric properties of a structure, acquired with the most up-to- date automated surveying systems, are used to help validate structural integrity analyses.

Prof. Alessandra Marini (University of Bergamo)

In progress...

Prof. Siro Casolo (Politecnico di Milano)

In progress...

Prof. Jose M. Adam (Universitat Politècnica de València)

RETROFITTING REINFORCED CONCRETE COLUMNS WITH STEEL CAGING. 15 YEARS OF RESEARCH AT THE ICITECH

Prof. Jose M. Adam (Universitat Politècnica de València)

Jose M. Adam is Associate Professor at the Universitat Politècnica de València, where he is engaged in teaching in the Civil Engineering School and the Department of Construction Engineering. He is Secretary of the ICITECH and founding partner in the spin-off company CALSENS. Before joining the Universitat Politècnica de València in 2005, he worked as structural engineer and was involved in the design and construction of many large projects. Dr Adam’s research is devoted to: building structures, structural failures, strengthening-retrofitting, assessment of structures and extreme events. He is the author of over 50 papers in high-impact international journals. One of his most significant recent achievement is the award of a Leonardo Grant by the BBVA Foundation for innovative ideas by relevant researchers. These grants are Spain’s most competitive awards with a success rate below 3% (over 2,100 applications).

He is Editor of Construction and Building Materials and Associate Editor of the Journal of Performance of Constructed Facilities.

Reinforced concrete columns in buildings often need strengthening either due to defects in the columns themselves, having to support higher loads than those foreseen in the initial design of the structure, or as the result of ageing or accidental damage. Steel caging is an effective, economical, easily applied and widely used method of strengthening RC columns.

This work shows the research carried out at the ICITECH (Universitat Politècnica de València) in the last 15 years on RC columns strengthened with steel caging. The research was financially supported from three research projects, which were awarded through competitive calls. The research carried out included experimental testing on: 1) full-scale columns subjected to axial loads, 2) full-scale columns under combined bending and axial loads, 3) full-scale beam-columns joints under cyclic-seismic loads. The research also included advanced numerical modelling and the proposal of design and construction recommendations.

Prof. Pablo Maturana (PUC Chile)

Prof. Pablo Maturana (PUC Chile)<

In progress...

Prof. Esequiel Mesquita (NUTEC/FAS)

“Learnings from Portuguese-Brazilian heritage constructions”

Prof. Esequiel Mesquita (NUTEC/FAS)

Esequiel Mesquita is current the Head of Laboratory of Civil Engineering of Nuclei of Industrial Technology of Ceará and Professor at Department of Civil Engineering of Faculty Ari de Sá. He holds a PhD in Civil Engineering from the University of Porto (2017). Previously, he concluded a bachelor’s degree in Civil Engineering by University State Vale of Acaraú. In 2011 and 2012 he was Coordinator of Laboratory of Building Materials at University State Vale of Acaraú, working in the fields of durability of structures and materials characterization. Since 2015 he is a Expert member of the National Committee of the International Council on Monuments and Sites - ICOMOS BRAZIL, since 2014 is member of the W098 CIB Committee - Intelligent and responsive buildings, since 2015 is a Expert member of ALCONPAT BRAZIL, and since 2014 is a Researcher member of the Institute of Telecommunication, Aveiro, Portugal. In 2016, he was awarded with Best Young Research Paper during XII International Conference on Structural Repair and Rehabilitation, in Porto. In 2016 and 2017 he was finalist of the Rodrigo Franco Melo de Andrade Award, the main Brazilian prize in the heritage area.

Since 2014 he is working with characterization and monitoring of heritage constructions, with support of Instituto do Patrimonio Histórico e Artistico Nacional – IPHAN (BRAZIL). He had analyzed several historic structures in Portugal and Brazil. His research experience combines large-scale testing and non-destructive characterization, structural health monitoring and optical sensors development. His main research interests include assessment, maintenance and repair of historic structures, structural health monitoring, structural testing and modelling.

He has supervised Bachelor and Master studies in the field of heritage constructions characterization, and currently is supervising PhD studies in the same field. He has authored or co-authored over 60 publications in international peer reviewed scientific journals, patents and conference proceedings, in the fields of building pathologies, durability of structures, structural health monitoring and heritage constructions characterization.

Prof. Petr Stepanek (BRNO University of Technology

In progress...

Prof. Humberto Varum (FEUP)

“Assessment and retrofitting of adobe heritage constructions”

Humberto Varum

Humberto Varum is currently full professor at the Civil Engineering Department of the Faculty of Engineering of the University of Porto, Portugal. Previously, he was associate professor at the Civil Engineering Department of the University of Aveiro, Portugal, where he had teach from 1997 to 2014. Since October 2010, he is Honorary Lecturer at the Department of Civil, Environmental and Geomatic Engineering, University College of London (UCL), London, United Kingdom. Since 2012, he is professor of the Master in “Evaluation Control and Reduction of Environmental Seismic Risk”, at the University of Rome “La Sapienza”, Rome, Italy. Since July 2016, he is Visiting Professor at the College of Civil Engineering, Fuzhou University, Fujian, China; in the aim of the High-Ends Program of the State Administration of Foreign Experts.

He holds a PhD in Civil Engineering from the University of Aveiro. Previously, he concluded a master's degree in Structures of Civil Engineering and a degree in Civil Engineering both from the University of Porto, Portugal. He was a grant-holder and temporary agent at the ELSA laboratory, Joint Research Centre, European Commission, Italy, for three years, where he developed research on earthquake assessment and rehabilitation of existing structures. He has working experience both in research and industry, having worked at an international level in structural design and retrofit. He has been Seconded National Expert to the European Commission in the period July 2009 to August 2010, at the Joint Research Centre. He is Integrated Member of CONSTRUCT research unit: Institute of R&D in Structures and Construction.

Since May 2015, he his member of the directorate body of the Construction Institute of the University of Porto. He is Member of the National Committee of the International Council on Monuments and Sites (ICOMOS), since 2009, and Expert Member of the ICOMOS’s International Scientific Committee of Earthen Architectural Heritage (ISCEAH). He is Member of the PROTERRA Iberian-American Network, since 2012. He has participated to post-earthquake field reconnaissance missions, in particular to L’Aquila (Italy, 2009), Lorca (Spain, 2011), Emilia-Romagna (Italy, 2012), Gorkha (Nepal, 2015) and Puebla (Mexico, 2017). His research experience combines large-scale earthquake testing and non-linear analytical modelling of structural systems. In his teaching he has specialised in the structural behaviour, dynamic of structures, strength of materials and conservation of structures. His main research interests include assessment, strengthening and repair of structures, structural health monitoring, structural testing and modelling, earthquake engineering, earth construction rehabilitation and seismic strengthening. He has coordinated and participated in several national and international research projects. He has supervised Master and PhD studies in the field of structural characterization and seismic retrofitting of structures. He has co-authored over 400 publications in international peer reviewed scientific journals, books and conference proceedings, in the fields of earthquake engineering, assessment and strengthening of structures, and earth construction retrofitting.

He speaks fluently Portuguese (mother tongue), Spanish, English and Italian and has a good command of French.

Enio Pazini (UFG/ALCONPAT Brasil/IBRACON)

“Paradigm changes in diagnosis and rehabilitation of concrete structures”

Enio Pazini

Enio Pazini Figueiredo is civil engineer graduated in 1985, and Full Professor of the Civil and Environmental Engineering School of Federal University of Goiás, Brazil. He teaches Construction Materials, Concrete Durability, Corrosion of Steel in Concrete and Concrete Structures Rehabilitation. He did specialization in Pathology of Constructions in 1988 in the Eduardo Torroja Institute (Spain). He received his Master Science degree (MSc) in 1989 of the Federal University of Rio Grande do Sul, Brazil, and his DSc degree in 1994 from Sandwich Program/CNPq between São Paulo University (Brazil), Eduardo Torroja Institute (IccET/Spain) and Aston University (UK). In 1998 made improvement course on Advanced Technologies for the Construction sponsored by the Japan International Cooperation Agency (JICA). In 2009 he was visiting professor in Post-Doc Program at the Norwegian University of Science and Technology (NTNU). He is co-editor and co-author of the three Special Publications of the American Concrete Institute on High Performance Concrete (ACI SP-207, ACI SP-229 and ACI SP-253). He is co-author of the other three books on Concrete Structures Repair and Maintenance published in México, Colombia, Brazil and Spain. He is co-author of two books on Materials Construction and Concrete published by the Brazilian Institute of Concrete. He was delegate in RILEM, representing Brazil, during the years 1996 to 2000. He was President of the Brazilian Association of Pathology Construction (ALCONPAT Brasil, 2016 – 2018). Currently, he is Vice-President of Latin American Association of Quality Control, Pathology and Rehabilitation of the Building. (Alconpat International, 2017 – 2019). He is/was a professor in several courses of the master and DSc degree in Brazil, Spain and around of the Latin American countries. He has published more than 100 papers in International Congresses and Journals including Corrosion Journal of the NACE/USA, Cement Concrete Research, Materials and Structures of the RILEM, Concrete Plant International, Concreto & Construções/IBRACON/Brazil, Journal of Civil Engineering and Architecture, Journal of Materials in Civil Engineering, Revista de La Construcción/Chile, Key Engeneering Materials, Construction & Building Materials, Materiales de Construcción of the IccET/CSIC/Spain, Hormigón of the AATH/Argentina, American Society Civil Engineering/USA, Tèchne/Pini/Brazil, Advances in Materials Science and Engineering, IBRACON Structures and Materials Journal etc. He received awards and recognition due to his technical and scientific contribution within Brazil, Venezuela, México, Paraguay and Perú. His research interest includes repair materials and techniques, corrosion of steel in concrete, electrochemical techniques, durability of cement-based materials and mineral admixtures and sustainable concretes with Construction and Demolition Residue, Rice Husk-Ash and Marble and Granite Beneficiation of Residue (MGBR). He has been consultant of important works in Brazil and in Latin America. In 2013 received the title of Doctor Honoris Causa of the Scientific University of Peru (UCP).

Registration fees are in Euros

Registration Fees

To Register click here

For other informations please contact: info.cinpar2018@enic.it

image description

Participants

(before 30 March 2018)

500

+ VAT
€ 600 + VAT (after 30 March 2018)
  • Attendance of all sessions
  • Inclusion of accepted paper in the Conference Proceedings
  • Lunches and Coffee-breaks during the Conference
  • Welcome reception
  • Conference banquet
image description

Students

(before 30 March 2018)

250

+ VAT
€ 350 + VAT (after 30 March 2018)
  • Attendance of all sessions
  • Inclusion of accepted paper in the Conference Proceedings
  • Lunches and Coffee-breaks during the Conference
  • Welcome reception
  • ---
image description

Accompanying persons

(before 30 March 2018)

100

+ VAT
€ 100 + VAT (after 30 March 2018)
  • Conference banquet
  • ---
  • ---
  • ---
  • ---
Please look at the following summary prior to registering to check if VAT is due:
  1. Professor/student/personnel of EU Public University: VAT NOT DUE (VAT not due as long as the registration is paid directly by the University)
  2. Professor/student/personnel of EU private University: VAT NOT DUE (VAT not due as long as the registration is paid directly by the University), except for Italian private Universities (VAT 22% DUE)
  3. Professor/student/personnel of extra EU public University: VAT NOT DUE (VAT not due as long as the registration is paid directly by the University)
  4. Professor/student/personnel of extra EU private University: VAT NOT DUE (VAT not due as long as the registration is paid directly by the University)
  5. Private from EU: VAT 22% DUE
  6. Private extra EU: VAT 22% DUE
Important Notes

(1) The inclusion of accepted papers in the Conference Proceedings requires the payment of the registration fee for each paper to be made no later than 21 May 2018.

(2) For each one additional accepted and presenting paper the second one associated to the same registration, a 100 € contribution will be charged.

Local do Evento

Em Construção.

Prêmios

O concurso “Prémios CINPAR2018”, que irá premiar 3 artigos submetidos, aceites e apresentados no CINPAR2018, tem os seguintes objetivos:


  • Incentivar e premiar a elaboração de publicações na área da Patologia e Reabilitação de Estruturas;
  • Promover a apresentação pública, perante a comunidade técnica e científica participante no CINPAR2018, de três trabalhos de mérito na área referida.

No âmbito desta dupla finalidade, do conjunto de artigos admitidos ao concurso “Prémios CINPAR2018”, serão premiados 3 artigos, nomeadamente:


  • Melhor artigo de Jovem Investigador
  • Melhor artigo de carácter científico
  • Melhor artigo de carácter técnico

REGULATION OF THE CONTEST “CINPAR 2018 PRIZE”

Download Regulation


  1. OBJECTIVES
    1. The contest “CINPAR2018 PRIZE”, which will reward 3 papers submitted to CINPAR2018 that were accepted and presented during the conference, has the following objectives:

      - Encourage and reward publications in the field of Structural Defects and Rehabilitation;

      - Promote the public presentation of three high quality works in these areas to the technical and scientific community of CINPAR2018.

    2. Given these two objectives, the best article of those submitted to each one of the three following categories of the “CINPAR2018 PRIZE” will be awarded:

      - In the name of Viterbo O´Reilly Prize, to the Best article from a Young Researcher

      - In the name of Odd Gjorv Prize, to the Best scientific article

      - In the name of Regino Gayoso Blanco Prize, to the Best technical article

  2. PRIZES
    1. The current contest will award one first prize for each of the categories previously referred. 2.2 The award winners will be announced during the closing session of the conference CINPAR2018.
    2. The authors of the winning articles will receive a diploma certifying the quality of the article. Each winning article will also be entitled to a voucher that is worth one registration fee for the next CINPAR conference.
  3. ELEGIBILITY
    1. All articles submitted, accepted and presented orally during the CINPAR2018 conference will be considered to be eligible for the “CINPAR2018 PRIZE”, regardless of the conference official language in which they are written, and they were orally presented.
    2. For an article to be eligible for the “CINPAR2018 PRIZE”, at least one of its authors must be registered in the CINPAR2018 conference and the article must be presented orally.
    3. Regardless of the number of authors, each article can only be analyzed once and can only run in one of the “CINPAR2018 PRIZE” categories.
    4. An article can only run for the “Best article from a Young Researcher” category if the oral presentation of the article during the conference is performed by the first author and if the first author is a Post-Graduate student no more than 35 years old. The first author of the winning article in this category will need to provide proof of his age and student status in order to claim the award.
    5. Technical articles are not eligible to run for the “Best article from a Young Researcher” category.
  4. CONTEST SELECTION COMMITTEE
    1. The Selection Committee for the contest “CINPAR2018 PRIZE” will be nominated by the Organizing Committee of the CINPAR2018 conference. The name of the Selection Committee members will be disclosed during the closing session of the conference CINPAR2018. The Selection Committee will include researchers and practicing technicians with known expertise in the conference topics.
  5. BEST ARTICLES SELECTION PROCESS
    1. The selection process of the articles submitted to the CINPAR2018 conference will involve the following stages:

      Stage 1: All articles will go through a first quality assessment stage carried out by the Scientific Committee of CINPAR2018. Incomplete articles or articles not complying with admissibility requirements will be not be eligible for the contest.

      Stage 2: Each member of the Selection Committee will nominate two articles they found to be the best in each category of the contest. Based on these nominations, the articles with the most votes in each of the three categories will be selected as the winning articles.

    2. All decisions are adopted by majority vote involving the members of the Selection Committee.
    3. The President of the Selection Committee will have a casting vote.
    4. The decisions of the Selection Committee are final and cannot be reversed.
image description

Prof. Vitervo O'Reilly

Engenheiro Civil, Doutor em Ciências Técnicas e Doutor em Ciências, Professor e Acadêmico Emérito e Pesquisador Titular, Vitervo O’Reilly Diaz foi professor e acadêmico Emérito e pesquisador titular da Academia de Ciências de Cuba, e assessor e fundador do Instituto Superio Politécnico José António Echeverría de Havana. Foi membro do Grupo Ibero-americano paro o Estudo da Corrosão das Armaduras nas Estruturas de Concreto. Também foi membro do Instituto Brasileiro do Concreto (IBRACON), do Instituto Americano do Concreto (ACI) e imenso colaborador do CINPAR durantes suas edições iniciais. Professor Viterno contribuiu imensamente para o desenvolvimento da tecnologia do concreto, e para o estudo da corrosão das armaduras. Uma de suas maiores contribuições para a engenharia civil foram seus métodos de dosagem de concreto, conhecido em quase todo o mundo. Por todo seu trabalho científico, o Prof. Vitervo recebeu inúmeros prêmios e condecorações em todo o mundo.
image description

Prof. Odd Gjorv

O Professor Odd Gjorv finalizou seus cursos de Mestrado, PhD e Doutor em Ciências (DSc) em 1958, 1961 e 1971, respectivamente. De 1959 a 1969, foi pesquisador associado do Norwegian Institute of Technology (NTH), precursor da reconhecida Norwegian Institute of Science and Technology (NTNU), em Trondheim, Noruega, onde passou a ocupar, desde 2015, a posição de Professor Emérito. Tendo sido pesquisador associado na Massachusetts Institute of Technology (MIT) e na University of California at Berkeley (UCB), entre 1969 e 1971, ele ingressou na NTNU em 1971, onde ocupou o cargo de Chefe do Departamento de Materiais de Construção e formou um grande número de mestres e doutores em tecnologia de concreto. De 1971 a 1995, envolveu-se continuamente no desenvolvimento e construção de todas as plataformas marítimas de concreto para exploração de petróleo e gás no Mar do Norte. Sua pesquisa incluiu materiais avançados de concreto e construção em concreto, assim como durabilidade e desempenho de estruturas de concreto em ambientes severos. Nos últimos anos estava atuando como colaborador internacional no programa Infraestrutura Submersa e Cidade do Futuro Submersa, da Universidade Tecnológica Nanyang, em Cingapura. Publicou mais de 400 artigos científicos e dois livros, tendo contribuído para muitos outros livros profissionais. Recebeu vários prêmios e honrarias internacionais por suas pesquisas. Odd foi membro da Academia de Ciências Tecnológicas da Noruega desde 1979, “fellow” do American Concrete Institute (ACI) e do Instituto Americano de Concreto, desde 1989. Gjorv participou intensamente de eventos científicos no Brasil, brindando o meio técnico-científico brasileiro com palestras e discussões memoráveis. Esteve no congresso CINPAR, em Fortaleza, 2012, e nos Congressos Brasileiros do Concreto (CBC), do IBRACON, em Natal e Bonito, respectivamente em 2014 e 2015.
image description

Prof. Regino Gayoso Blanco

Arquiteto e Doutor em Ciências Técnicas, o Prof. Regino Regino Antonio Gayoso Blanco, foi Pesquisador Titular, e Professor Adjunto do Instituto Superior Politécnico José Antonio Echeverría (CUJAE). Profissional de destaque e incansável revolucionário, Membro do Conselho Técnico Assessor da Construção, do Conselho Científico da Faculdade de Engenharia da CUJAE. Por sua destacada contribuição ao desenvolvimento das construções, recebeu inúmeras condecorações e prêmios de reconhecimento. Fundador da Industria de Materiais, Vanguardia Nacional del Sector  e Acadêmico de Mérito da Academia de Ciências de Cuba, ingressou na UNAICC em 1983, desde sua constituição, onde desempenhou vários cargos diretivos, Presidente de Seção de Base, membro da Junta Diretiva Provincial de Havana e posteriormente, Presidente da Comissão de Ética. Professor Antonio Gayoso Blanco também contribui fortemente para a consolidação do CINPAR como conferencia, sempre colaborando com palestras e discuções.